<?xml version="1.0" encoding="utf-8"?>
<CADFile xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" Name="gantry right" units="Inches">
  <layers>
    <layer name="Default" color="127,255,0">
      <ModificationCount>4</ModificationCount>
      <mat />
      <objects>
        <pline xsi:type="PolyRectangle" id="4" Closed="true" w="10" h="3">
          <ModificationCount>20</ModificationCount>
          <mat />
          <pts>
            <p>0,0,0</p>
            <p>10,0,0</p>
            <p>10,3,0</p>
            <p>0,3,0</p>
          </pts>
        </pline>
        <points id="1">
          <ModificationCount>7</ModificationCount>
          <mat />
          <pts>
            <p>0.5,0.5</p>
            <p>3.5,0.5</p>
            <p>9.375,2.75</p>
            <p>9.375,0.25</p>
          </pts>
        </points>
        <circle id="2" c="2,0.5,0" d="0.866">
          <ModificationCount>7</ModificationCount>
          <mat />
        </circle>
      </objects>
    </layer>
  </layers>
  <MachiningOptions />
  <machineops>
    <mop xsi:type="MOPPocket">
      <ToolDiameter>0</ToolDiameter>
      <ToolProfile>BullNose</ToolProfile>
      <PlungeFeedrate>30</PlungeFeedrate>
      <CutFeedrate>300</CutFeedrate>
      <StartPoint>Default</StartPoint>
      <Name>Pocket1</Name>
      <StockSurface>0</StockSurface>
      <ClearancePlane>1.5</ClearancePlane>
      <primitive>
        <prim>2</prim>
      </primitive>
      <mat />
      <TargetDepth>-0.275</TargetDepth>
      <DepthIncrement>1</DepthIncrement>
      <FinalDepthIncrement>0</FinalDepthIncrement>
      <CutOrdering>DepthFirst</CutOrdering>
      <StepOver>0.4</StepOver>
      <StepoverFeedrate>Default</StepoverFeedrate>
      <LeadInMove>
        <LeadInType>None</LeadInType>
        <SpiralAngle>0</SpiralAngle>
        <TangentRadius>0</TangentRadius>
      </LeadInMove>
    </mop>
    <mop xsi:type="MOPDrill">
      <ToolDiameter>0</ToolDiameter>
      <ToolProfile>BullNose</ToolProfile>
      <PlungeFeedrate>30</PlungeFeedrate>
      <CutFeedrate>300</CutFeedrate>
      <StartPoint>Default</StartPoint>
      <Name>Drill1</Name>
      <StockSurface>0</StockSurface>
      <ClearancePlane>1.5</ClearancePlane>
      <primitive>
        <prim>1</prim>
      </primitive>
      <mat />
      <TargetDepth>-0.5</TargetDepth>
      <HoleDiameter>0.25</HoleDiameter>
      <CustomScript />
    </mop>
  </machineops>
  <ActiveLayer>Default</ActiveLayer>
</CADFile>